Address: 2 - TEC MA-516-100 SERIES Owner's Manual

Address: 2
(Optional Functions 1)
Bit No.
1 Fraction Rounding Process on Quantity
Extension or % Calculations
2 Fraction Rounding Process on Quantity
Extension or % Calculations
3 Credit Balance (over-subtraction of the
sale by [DOLL DISC], [VOID] keys, etc.)
in REG mode
4 Obtaining Taxable Total (sale total
including taxes) by [TXBL TL] or [ST]
key before finalizing each sale
5 SPP Fraction Round-up Process
6 Department Zero Skip on Report
7
8 Cashier Identifying Function
Supplementary Description:
Bit 1 & Bit 2: If both RESET, ROUND OFF status is obtained.
If both SET, Bit 2 status prevails, i.e., ROUND DOWN.
(Fraction Rounding Process on tax/PST calculations is fixed to ROUND OFF, out of the
application of the process selected here. As for GST, see Address 14 -Bits 2 & 3)
Bit 3: The [RTN MDSE] key is operable to turn the sale into negative regardless of this bit status
selection.
Bit 5: ex.) When a customer wants 2 items (Purchased Quantity) of the 3 items (Whole Package
Quantity) of $1.00 (Whole Package Quantity):
RESET status (ROUND UP PRODUCT)
{100 (Whole Package Price)
Round up to $0.67
initial SET Bit Nos.
Your Selection
Content
-- vacant --
3 (Whole Package Q'ty)} x 2 = 66.666...
- 120 -
Selective Status
RESET
ROUND OFF
Follow Bit 1 status.
PROHIBITED
NOT COMPULSORY
ROUND UP PRODUCT ROUND UP ITEM PRICE
NO ZERO SKIP
PROVIDED
EO1-11116
MA-516-100 SERIES
0
SET
ROUND UP
ROUND DOWN
ALLOWED
COMPULSORY
ZERO SKIP
NOTHING