Removing A Pc Card - Toshiba TECRA M9 User Manual

2. Press the PC Card gently to ensure a firm connection is made.
3. After inserting the PC Card you should refer to its documentation and
also check the configuration in Windows in order to ensure that it is
correct.

Removing a PC Card

To remove a PC Card, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Task Bar.
2. Point to PC Card and click the left Touch Pad control button.
3. Press the PC Card eject button to partially extend it out of the computer.
If the PC Card is not inserted all the way into the computer, the eject button
may not cause it to pop out sufficiently to allows it to be grasped. In this
instance, simply push the PC Card firmly back into the computer and then
press the eject button again.
4. Press the extended PC Card eject button in order to eject the PC Card
partially out of the computer.
5. Grasp the PC Card and remove it.
PC Card
eject button
User's Manual
PC Card slot
PC Card
Figure 3-1 Inserting the PC Card
Figure 3-2 Removing the PC Card
Hardware, Utilities and Options
PC Card
3-13