Dual Pointing Device - Toshiba TECRA M9 User Manual

Dual Pointing device

If you are using a USB mouse, you should also refer to both the
device
mouse.
Touch Pad/AccuPoint
Problem
Either the Touch Pad
or the AccuPoint does
not work.
On-screen pointer does
not respond to pointing
device operation
Double-tapping
(Touch Pad) or
double-clicking
(AccuPoint) does not
work
The mouse pointer
moves too fast or too
slow
User's Manual
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse icon.
Pressing FN + F9 to enables.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the pointer speed as required and click
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Panel -> Hardware and Sound -> Mouse
icon.
the Buttons tab.
click OK.
Panel -> Hardware and Sound -> Mouse
icon.
the Pointer Options tab.
OK.
Troubleshooting
USB
8-12