Toshiba TECRA M9 User Manual page 43

Notches
Docking port
■
Only the TOSHIBA Express Port Replicator can be used with this
computer. Do not attempt to use any other Port Replicator.
■
Keep foreign objects out of the docking port. A pin or similar object can
damage the computer's circuitry. A plastic shutter protects the
connector.
Memory module slot
Battery release latch
Battery pack
HDD pack cover
screws
Hard disk drive
Battery lock
Ultra Slim Bay lock
screw
User's Manual
Notches on the computer engage hooks on the
TOSHIBA Express Port Replicator to ensure a
secure connection.
This port enables connection of an optional
TOSHIBA Express Port Replicator described in
Chapter 3, Hardware, Utilities and
The slot B memory module is located here. The
memory module slot allows for the installation,
replacement and removal of additional memory
module.
Refer to the Additional memory module
Chapter 3, Hardware, Utilities and Options.
Slide and hold this latch into its 'Unlock' position
in order to release the battery pack ready for
removal. For more detailed information on
removing the battery pack please refer to
Chapter 6, Power and Power-Up
The battery pack provides power to the computer
when the AC adaptor is not connected. For more
detailed information on the use and operation of
the battery pack please refer to Chapter 6,
and Power-Up Modes.
Two screws secures the HDD cover.
This contains a Hard disk drive pack, which can
be removed and reinstalled. For more
information on how to remove or reinstall the
Hard disk drive pack, refer to the section on the
in Chapter 3, Hardware, Utilities and Options.
Slide the battery lock to release the battery pack
for removal.
One screw secures the Ultra Slim Bay latch.
The Grand Tour
Options.
section in
Modes.
Power
2-7