Toshiba TECRA M9 User Manual page 101

Portable personal computer
Hide thumbs Also See for TECRA M9:
Table of Contents

Advertisement

2. Grasp the disc tray gently and pull until it is fully opened.
3. Lay the CD/DVD, label side up, in the disc tray.
When the disc tray is fully opened, the edge of the computer will extend
slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD
at an angle when you place it in the disc tray. After seating the CD/DVD,
however, make sure it lies flat.
Do not touch the laser lens or any portion of its surrounding casing as
this could cause misalignment.
Prevent foreign objects from entering the drive. Check the surface of
the disc tray, especially the area behind the front edge of the disc tray,
to make sure there are no such objects before closing the drive.
User's Manual
Figure 4-6 Pressing the eject button and pulling the disc tray open
Figure 4-7 Inserting a CD/DVD
Operating Basics
Eject button
Disc tray
Laser lens
4-12

Advertisement

Table of Contents
loading

Table of Contents