Table of Contents
Advertisement
PAPER SETTING
1. Rear feed (friction/tractor type)-used for fan-fold form, multiple copy sheets
2. Bottom feed (tractor type)-used for fan-fold, multiple copy sheets
Rear Feed Tractor Paper Setting
1. Attach the paper rack to the rear of the printer by inserting it into the two holes
located there, as shown in Fig. 8. Connect the ground wire. It is located between
the paper rack and the power cable receptacle's right-hand screw (shown in Fig.
8). Failure to do so may cause malfunction of the printer. The purpose of this ground
connection is to eliminate static electricity formed by the paper.
Fig. 7
Fig. 8
9
Advertisement
Table of Contents
