Table of Contents
Advertisement
DIP Switch Bank 2
This bank of switches selects some of the other features of the Epson 420i. These
switches may be left in the OFF position as they come from the factory, or you may
wish to change some of the switch settings to select different features. First you must
decide if you want to use the Epson FX mode or the IBM Graphics Printer mode,
determined by Switch 2-4.
* LF (Line Feed) Command Selection
A carriage return is executed when the printhead returns to the print start or left margin
position.
* CR (Carriage Return) Command Selection
Execute a carriage return upon
receiving a line feed
If SW2-1 and SW2-2 are both set on ON, the CR command and the LF command
perform the same function.
* Baud Rate Selection
* Parity Selection
* Parity Error Selection
Disabled
Enabled
27
Auto-CR
SW 2-2
OFF
ON
Advertisement
Table of Contents
