Setting The Watering Day Schedule; Setting A Calendar Schedule - Toro GreenKeeper 212 User Manual

Setting the Watering Day Schedule

For each program, you can select Calendar, Interval
Odd, Even or Off. To set a Calendar schedule, continue
here. To set an Interval schedule see page 18. To set an
Odd or Even schedule see page 19. To turn Off a pro-
gram, see page 19.

Setting a Calendar Schedule

Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
CAL (Calendar) is not displayed, press the +/
–/ button as needed to select CAL.
OFF
Press the button. The watering days currently
NEXT
set for this program will be displayed.
will begin flashing.
To select Sunday as a watering day, press the +/
button. To remove Sunday from the schedule, press
the –/ button.
OFF MO
ing. Continue to select or remove each day of the
week until only the desired watering days are shown.
WATERING DAYS
switch setting. If necessary,
ON
(Sunday)
SU
(Monday) will now begin flash-
7
6. To set a Calendar schedule for another program,
repeat all of the steps beginning at step
When you have completed setting the Calendar
or
schedule for each program (as needed) return the
control dial to the
Note: Each program can have its own Calendar, Inter-
val or Odd/Even schedule, but only one schedule can
be active at a time for that program. The watering day
schedule or OFF shown in the display when the control
ON
dial is in the
WATERING DAYS
current schedule for that program.
3 2
PGM A
SU MO TU WE TH FR SA
3
4 5
1
2
3
position.
RUN
position, will be the
5
4
5
.
17