Setting Program Start Times
Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
Program start time number 1 will begin flashing. The
current program start time or OFF will be displayed
for start time number 1. To select a different program
start time number, press the +/
until the desired number is flashing.
Note: The numbers (1–4) shown at the top of the display
designate program start times and should not be con-
fused with station numbers. The station numbers will be
shown at the bottom of the display when setting zone run
time.
Press the
NEXT
begin flashing.
Note: To remove the start time, select OFF by
pressing the +/
time, and continue at step
To set the hour (and
–/
button until the desired hour is flashing.
OFF
Press the
NEXT
flashing.
To set the minutes, press the +/
until the desired minute is flashing.
Press the
NEXT
number will begin flashing.
20
PROGRAM START TIME
switch setting. If necessary,
or the –/
ON
button. The hour digit(s) or OFF will
and –/
buttons at the same
ON
OFF
.
/
), press the +/
AM
PM
button. The minute digits will begin
or –/
ON
OFF
button. The next program start time
button
OFF
To select another start time number, press the +/
or the –/
ber is flashing.
10. To set, change or remove a program start time for
the start time number selected, repeat all of the
steps starting at step
11. To set program start times for another program,
repeat all of the steps starting at step
Return the control dial to the
or the
ON
button
9
2
3
1 2
PGM A
AM
12
4 5
6 7
1
2
button until the desired start time num-
OFF
.
RUN
3 5 7
9
4 6 8
3
5
7
9
ON
.
position.