Setting An Odd Or Even Schedule; Turning Off A Program - Toro GreenKeeper 212 User Manual

Setting an Odd or Even Schedule

Note:The Odd/Even Selector Jumper must be removed
for this type of watering schedule. See page 14 for details.
Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
Odd or Even is not displayed, press the +/
–/ button as needed to select Odd or Even.
OFF
Note: When Odd is selected, the 31st day of the
month and the 29th day of a leap year will not be
active watering days.
4. To set an Odd or Even schedule for another
program, repeat steps
When you have completed setting the Odd or Even
schedule for each program as needed, return the
control dial to the
RUN
3
5
1
WATERING DAYS
switch setting. If necessary,
or
ON
and as needed.
position.
2
PGM B
3
2
3

Turning Off a Program

Note: Turning off a program does not alter or erase a
preset watering day schedule. Selecting Off simply
places the program on hold until one of the watering day
schedules is selected.
Turn the control dial to the
position.
Check the s switch setting. If necessary,
PROGRAM
reposition the switch to select the desired program.
Press the +/ or –/
ON OFF
4. To turn another program Off, repeat steps
as needed.
Return the control dial to the
3
5
1
WATERING DAYS
button until OFF is flashing.
and
position.
RUN
2
PGM C
3
2
3
19