Labels - Epson 1010 User Manual

CAUTION: Do not use multi-part forms with the single-
sheet feeding system or the optional cut sheet feeder.

Labels

If you need to print labels, always use labels mounted on a
continuous backing sheet with sprocket holes for use with a tractor.
Do not try to print labels as single sheets because labels on a shiny
backing sheet almost always slip a little.
You load labels the same way that you load continuous paper except
that the paper thickness lever must be adjusted for printing labels.
See Loading Continuous Paper earlier in this chapter. For the correct
paper thickness setting, see The Paper Thickness Lever earlier in this
chapter.
Paper Handling
2-27