Word Processing - Epson 1010 User Manual

Word Processing

a
ESC
Format:
A S C I I c o d e : E S C
Decimal:
Hexadecimal:
Comments:
Sets the type of justification.
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when the buffer becomes full; HT and BS are invalid except in
n = 0 mode. For n = 3 there must be no carriage returns within a
paragraph.
ESC SP
(space)
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the
character. The number of dots is determined by n, which should
be from 0 to 127. Each unit of space is 1/120th of an inch in draft
mode and 1/180th of an inch in Letter Quality and proportional
modes.
a
27 97
1B 61
ESC SP
27 32
1B 20
Select Justification
n
n
n
Set Intercharacter Space
n
n
n
Command Summary
9-33