Character Sets - Epson 1010 User Manual

Character Sets

ESC t
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Selects the character table used by codes 128 to 255. Selecting a
graphics character set does not disable italic printing. Italic
printing can still be selected by ESC 4. The following values can be
used for n:
0: Selects the italics character set.
1: Selects a graphics character set.
2: Selects the user-defined character table and remaps user-
defined codes O-127 to 128-255.
Overrides the function of DIP switch 1-7. Note that the value of n
must equal 00 hex, 01 hex, or 02 hex.
ESC 4
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Causes characters from the italic character set to be printed. This
command is valid even if a graphics character set has been
selected by ESC t or by DIP switch 1-7, but the character graphics
are not italicized.
9-34 Command Summary
n
ESC t
n
27
116
1B 74
ESC 4
27 52
1B 34
Select Character Set
n
Select Italic Mode