Commands Arranged By Topic; Printer Operation - Epson 1010 User Manual

Commands Arranged by Topic

This following section lists and describes all the commands by topic.
See the Quick Reference card at the back of this book for a handy list
of commands by topic.

Printer Operation

ESC @
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Resets the printer mode and clears the current print line preceding
the command.
DC1
Format:
A S C I I c o d e : D C 1
Decimal:
H e x a d e c i m a l : 1 1
Comments:
Returns the printer to the selected state if it has been deselected by
the printer deselect code (DC3). It does not select the printer if it
has been switched off line by the ON LINE button.
Note: DC1 and DC3 do not work if pin 36 on the parallel interface
is low.
9-8 Command Summary
ESC @
27 64
1B 40
17
Initialize Printer
Select Printer