Epson 1010 User Manual page 226

Commands Arranged by Topic
ESC b
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be from 0 to 7. Therefore,
up to eight sets of vertical tabs can be set. The channels are
selected by ESC /. To clear the tabs in channel c, use ESC b c 0.
ESC /
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command is used to select the vertical tab channel, with the
value of c from 0 to 7. All subsequent VT commands use the
channel selected by this command. If no channel has been
selected, channel 0 is used.
9-18 Command Summary
ESC b
27 98
1B 62
ESC /
27 47
1B 2F
Set Vertical Tabs in Channels
c n1 n2
c n1 n2
c n1 n2
Select Vertical Tab Channel
c
c
c
... 0
... 0
... 00