Installing An Expansion Board With Individual Retainers - HP ProLiant ML110 - G2 Server User Manual

Install the expansion board.
6.
Close the expansion slot latch to secure the board.
7.
Connect any required internal or external cables to the expansion board. Refer to the documentation
8.
that ships with the expansion board for more information.
Reinstall the slot cover retainer.
9.
Replace the access panel
10.

Installing an expansion board with individual retainers

CAUTION:
and remove all AC power cords before removing or installing the expansion boards.
To install an expansion board:
Power down the server (on page 6).
1.
Extend the server from the rack, if applicable.
2.
IMPORTANT:
installing a board.
Remove the access panel
3.
("Access panel" on page 6).
To prevent damage to the server or expansion boards, power down the server
It may be necessary to remove the slot cover next to the slot in which you are
("Access panel" on page 6).
Hardware options installation 43