Operating
Adjusting the picture (brightness, contrast, color)
Brightness and contrast can be adjusted using each (+)
and (-) button (remote control). At a video signal, the
color can also be adjusted.
1.
Press the (+) or (-) button under the item indication
to adjust. Use the (+) button to increase the item, or
use the (-) button to decrease the item.
A dialog will appear on the screen to aid you in
adjusting the item to adjust. You can inactivate the
display using the item "MESSAGE" of the SCREEN
27)
menu
(
.
2.
If you don't do anything, the dialog will automatically
disappear after about 5 seconds.
Recalling your adjustment
This projector can memorize 4 settings by the MY
MEMORY function of the PICTURE menu
Pressing the MEMORY button (remote control) calls the
settings and adjusts the current picture.
The memory which is not registered is skipped. When
there is no memory registered, the picture isn't adjusted.
1.
Press the MEMORY button.
Each time you press the MEMORY button, one of
memorized settings comes in the order below.
LOAD1
LOAD2
16
LOAD3
LOAD4
20)
.
(
POWER
LIGHT
OPT BLK
MODE
MEMORY
MENU
RESET
ASPECT
IRIS
BRIGHT CONTRAST COLOR
ENTER
MENU
RESET
BRIGHT CONTRAST COLOR
DVI
PC
AUTO
COMPO
S-VIDEO
VIDEO
POWER
LIGHT
POWER
LIGHT
OPT BLK
MODE
MEMORY
ASPECT
IRIS
ENTER
OPT BLK
MODE
MEMORY
MENU
RESET
BRIGHT CONTRAST COLOR
DVI
PC
AUTO
COMPO
S-VIDEO
VIDEO