Table of Contents
Advertisement
Multifunctional settings
IMAGE Menu
IMAGE Menu
With the IMAGE menu, the items shown in the table below
can be performed. Perform each operation in accordance
with the instructions in the table below.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
H PHASE
22
Select an Aspect Ratio using the ▲/▼ buttons:
At a COMPUTER input:
4:3
16:9
NORMAL
• The NORMAL keeps the original aspect ratio of the input signal.
• At a COMPUTER input, selecting an aspect ratio may display the
message"SYNC IS OUT OF RANGE". In this case, please select
one of other aspect ratios.
At a DVI-D input:
4:3
16:9
WIDE
At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO
input:
4:3
16:9
WIDE
• At a COMPONENT VIDEO input of 16:9 HD signal of 1125i(1080i)/
750p(720p), only 16:9 can be selected.
At no input.:
4:3
16:9
Adjust the over-scan ratio using the ▲/▼ buttons. :
Small
Large
memo
This item can be selected only at a video signal.
memo
When this adjustment is too large, certain degradation may
appear at the frame area of the picture. In such a case, please
adjust small.
Adjust the vertical position using the ▲/▼ buttons. :
Up
Down
memo
This item cannot be selected only at a DVI-D signal.
Adjust the horizontal position using the / buttons. :
Left
Right
memo
This item cannot be selected only at a DVI-D signal.
Adjust the horizontal phase to eliminate fl icker using the ▲/▼
buttons. :
Right
Left
memo
This item can be selected only at a RGB signal or a
component video signal.
Description
MOVIE1
MOVIE2
MOVIE-1
MOVIE-2
MENU [ RGB ]
:SELECT
PICTURE
ASPECT
4:3
IMAGE
OVER SCAN
95
INPUT
V POSITION
25
SETUP
H POSITION
142
SCREEN
H PHASE
16
OPTION
H SIZE
1344
EASY MENU
AUTO ADJUST
NORMAL
Advertisement
Table of Contents
