Table of Contents
Advertisement
Multifunctional settings
SETUP Menu
SETUP Menu
With the SETUP menu, items shown in the table below can
be performed. Perform each operation in accordance with
the instructions in the table below.
Item
KEYSTONE
WHISPER
IRIS
MIRROR
26
Adjust the Keystone (Vertical) Distortion:
Upper in the data
memo
The adjustable range of this function will vary with the type
of input signal. At some signals, this function may not work well.
memo
When the V:INVERT or the H&V:INVERT is selected
under the MIRROR item, if the projector screen is inclined or if the
projector is angled downward, this function may not work correctly.
memo
When the WIDE is selected under the ASPECT item of the
IMAGE menu, this adjustment is ignored.
memo
When the zoom adjustment is set to the TELE side, this
correction may be excessive. This function should be used with
zoom set to WIDE whenever possible.
Select the NORMAL or the WHISPER using the ▲/▼ buttons. :
NORMAL
WHISPER
When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Adjust the iris using the ▲/▼ buttons. :
Select a mirror status using the ▲/▼ buttons. :
NORMAL
H:INVERT
Description
Lower in the data
V:INVERT
MENU [ RGB ]
PICTURE
KEYSTONE
IMAGE
WHISPER
INPUT
IRIS
SETUP
MIRROR
SCREEN
OPTION
EASY MENU
Bright
Dark
H&V:INVERT
:SELECT
+0
NORMAL
100
NORMAL
Advertisement
Table of Contents
