TPI The Value Leader 505 Instruction Manual

Photo / contact tachometer

Table of Contents

Download this manual

Enlarged version

The Value Leader

www.tpi-thevalueleader.com

505 Instruction Manual

Test Products International, Inc.

9615 SW Allen Blvd

Beaverton, OR 97005-4814 USA

Ph: 503-520-9197 Fax: 503-520-1225

Test Product International Ltd.

342 Bronte Street South, Unit 9

Milton, Ontario L9T 5B7

Ph: 905-693-8558 Fax: 905-693-0888

Test Products International UK Ltd.

Longley House, East Park

Crawley, West Sussex RH10 6AP

Ph: +44 (0) 1293 561212 Fax: +44 (0) 1293 813465

505

PHOTO / CONTACT

TACHOMETER

Instruction Manual

Table of Contents

Need help?

Do you have a question about the The Value Leader 505 and is the answer not in the manual?

Page 1 The Value Leader www.tpi-thevalueleader.com PHOTO / CONTACT TACHOMETER 505 Instruction Manual Instruction Manual Test Products International, Inc. 9615 SW Allen Blvd Beaverton, OR 97005-4814 USA Ph: 503-520-9197 Fax: 503-520-1225 Test Product International Ltd. 342 Bronte Street South, Unit 9 Milton, Ontario L9T 5B7 Ph: 905-693-8558 Fax: 905-693-0888 Test Products International UK Ltd.
Page 2 WARNING OPERATION SPECIFICATIONS Function Range Accuracy Read instructions before operating: Be sure these instructions accompany the tool Photo Tach 6 - 30,000 RPM ± 0.1% of FS + 1 digit when passed from one user to a new or inex- Contact Tach 6 - 20,000 RPM ±...
Page 3 PHOTO TACH OPERATION BATTERY REPLACEMENT Measurement Procedure: Measurement Procedure: 1. Unscrew contact collar from optical end of 505 (if attached). 1. Remove the screw holding the battery compart- 2. Attach a piece of reflectIive tape on the rotating ment cover in place on the back of the 505. object to be measured.
Page 4 SURFACE SPEED OPERATION CONTACT TACH OPERATION Measurement Procedure: Measurement Procedure: 1. Screw the shaft assembly to the optical end of 1. Screw the shaft assembly to the optical end of the 505. the 505. 2. Insert the cone or concave wheel that more 2.