15 minutes. This can be adjusted from 1 minute to 60 minutes by tapping on the time drop down menu. 3. Once the timer has been set, place the SP700 in the area being tested. Tap on ‘Start Test’ and the countdown timer will begin.
AUTO POWER OFF If the SP700 is not connected to a smart device for more than 8 minutes it will auto power off. When connected to a smart device the auto power off is disabled. Auto power off is also disabled during data...
GENERAL MAINTENANCE Housing: The SP700 can be wiped down with a damp lint-free cloth. Do not use any cleaning agents including solvent or soap. Battery Replacement: When the LED indicator blinks Red the batteries need to be replaced. 1. Turn the SP700 off. Loosen the battery cover screw and open the cover.
SPECIFICATIONS Range 0 to 999 ppm Carbon Resolution 1 ppm Monoxide Accuracy +/-3% + 3 digits (at 25⁰C +/- 3⁰C) Data Logging 10,000 readings in 1 sec to 59 min 59 sec intervals Battery Life Approximately 200 hours Battery Type AAA x 3 alkaline Operating 32 °F to 104 °F (0 °C to 40 °C)
SP700 STANDARD ACCESSORIES A700SP – Soft Pouch for SP700 SP700 OPTIONAL ACCESSORIES A925 – Carrying case capable of holding four smart probes A927 – Carrying case capable of holding two smart probes WARRANTY This product is warranted to the purchaser against defects in material and workmanship for three years from the date of purchase.
Page 8
Test Products International, Inc. 9615 SW Allen Blvd., Ste. 104 Beaverton, OR 97005 Tel: 503-520-9197 www.testproductsintl.com Test Products International, Ltd. 342 Bronte Road South, Unit #6 Milton Ontario Canada L9T 5B7 Tel: 905-693-8558 www.tpicanada.com Test Products International Europe Ltd. Rutherford Way Industrial Estate Rutherford Way Manor Royal Crawley...
Need help?
Do you have a question about the SP700 and is the answer not in the manual?
Questions and answers