Pre-Installation; Features; Packaging List; Ratings - Superior SDVI Installation And Operation Manual

PRE-INSTALLATION

Features

Installation Options
Residential - Vented Vertical Only
Manufactured (Mobile) Home
Natural Gas Or Propane (LP)
Bedrooms
Optional Wall-mounted Or Remote Thermostat
Electrical
The blower motor requires 120 Volts AC for operation. The fireplace is not
dependent on the blower or an outside electrical supply to operate.
Millivolt Valve
This insert is operated with a millivolt valve and therefore burns even
during a power outage.
Fuel
This insert comes from the factory equipped to burn natural gas at a speci-
fied elevation. The insert can be converted to burn LP (liquid propane) by
installing a conversion kit. Only LHP conversion kits can be used to convert
from NG to LP or LP to NG. Contact your LHP dealer for details.

RATINGS

Max/Min Input BTUh 0-2,000 Feet
(0-610 M)
u
Manifold Pressure (IN. WC)
Min. Inlet Pressure (IN. WC)
P4 Efficiency
Orifice (DMS) 0-2,000 Feet (0-610 M)
Unit factory equipped for 0-2000 FT/0-610 M, In Canada 0-4500 FT/0-1370 M
u
Tested to CSA P.4.1-02 "Testing Method for Measuring Annual Fireplace Efficiency.
v
Electrical Rating: 120 VAC, 60 HZ, Less Than 2 Amps
v
u

Packaging List

To install a SDVI insert, an insert body, face, surround (flange) kit are
required.
Insert Body Packaging List
1 Insert Body with Burner Cassette
1 Log Set
1 Bag of Embers
1 Fasteners: 6 slotted 1/4" truss screws
6 speed nuts
9 spring clips
3 plastic adhesive wire restraints
1 Installation and Operation Manual
Decorative Face Kits - One Required
• Arched Black Nickel Face, Surround (27" x 39"),
and Black Trim
• Arched Brushed Nickel Face, Surround (27" x 39"),
and Black Trim
• Arched Black Face, Surround (27" x 39"),
and Black Trim
Surround Components Include:
1 Top Surround
2 Side Surrounds
3 Black Extruded Trim Pieces
2 Elbowed Trim Fasteners
SDVI
NATURAL GAS
25,000/17,500
3.5
5.0
63.95%
#41 (.096")
LP GAS
25,000/18,500
10.0
10.5
67.20%
#53 (.0595")
7