Installation Of The Flow Cell - GE UV-1 User Manual

3.5 Installation of
the flow cell
Product Material of
Code No. wetted parts
S-2 Fluoro-plastic,
19-4840-02 optical quartz
HR-10 Fluoro-plastic,
19-6254-02 optical quartz,titanium
3 mm Fluoro-plastic,
19-2503-02 optical quartz
10 mm Fluoro-plastic,
19-2504-02 optical quartz
5 mm Silicon rubber,
Industrial polypropylene,
19-4510-02 optical quartz
* Flow rate 300 I/h at 0.1 MPa
Fig. 9. 3 mm flow cell
Monitor UV-1 accepts flow cells for Standard Chromatography, FPLC
and industrial applications.
Path Total dead
length volume
2 mm 80 µl
10 mm 24 µl
3 mm 50 µl
10 mm 250 µl
5 mm
All flow cell are mounted in the holders, ready to be installed directly
into the cell housing. Release the locking knob (Fig. 4:6) by turning it
against the direction of the arrow and insert the flow cell in its holder
into the optical unit. Lock it in position by turning the locking knob
fully in the direction of the arrow.
For more information please refer to the instruction sheet supplied
with the respectively flow cell.
Fig. 7. S-2 flow cell
Fig. 10. 10 mm flow cell
Illuminated Pressure Application
volume limit area
2 µl 0.3 MPa Standard
(3 bar) Chromatography
8.7 µl 1.0 Mpa FPLC, Standard
(10 bar) Chromatography
3 µl 1.0 MPa Preparative FPLC,
(10 bar) Standard Chromatography
8.7 µl 1.0 MPa Standard
(10 bar) Chromatography
0.2 MPa* Industrial scale
(2 bar)
Fig. 8. HR-10 flow cell
Fig. 11. Industrial flow cell
3. Installation
13