GE UV-1 User Manual page 10

2. General Description
10
Rear panel controls
Fig. 6. Control unit. Rear panel.
No. Item
Mains voltage selector
17
18 Fuse holder
19 Signal outputs
20 Mains inlet
21 Optical unit inlet
22 Ground terminal
Do not attempt to ground the control unit via the recorder
Note:
ground as the UV-1 is grounded via the mains ground.
Description
Selects mains voltage 110, 130, 220 and 240 V
Mains fuses: 1 x 250 mA for 110-130 V 60 Hz
1 x 125 mA for 220-240 V 50 Hz
The output signal is a 10 mV DC signal. The
terminals are connected to a potentiometric
recorder via shielded cables supplied. The
UV-1 is normally earthed via the mains ground
Inlet for the mains cable
Inlet for the optical unit
To connect the shield of an output signal cable