Attribute Check - Epson EQUITY Y14499113001 User Manual

When you finish running the color adapter check, press
return to the DEVICE LIST.
Color graphics adapter check
To check the color graphics adapter, press
The computer checks the video RAM (display memory) on the display
adapter by writing test data to memory, and then reading it hack and com-
paring it to the written data. The video enable signal of the display controller
chip is also tested.

Attribute check

To check the display attributes of the color graphics adapter card, press
2 ad Enter.
Several messages are displayed showing examples of all the possible
display attributes and colors. Check the information displayed on your
screen, and respond to the prompt:
Is the display correct (Y/N)?
Press and then
Y
If the colors are not correct, adjust the controls on your display monitor.
If they are still incorrect, press
Contact your Epson dealer to verify any monitor problems.
5-12
if the display is correct.
Enter
N and Enter.
0 ad Enter
then
1 ad Enter.
to