Epson EQUITY Y14499113001 User Manual page 86

Move the cursor to the desired communication speed and press
To set the type of parity check, move the cursor to Parity and press
The screen displays:
Enter.
None
Odd
Even
Move the cursor to the correct type of parity check and press
To change the data length, move the cursor to
The number changes to either 7 or 8, whichever was not displayed
Enter.
before. Press
Enter
To change the number of stop bits, move the cursor to Stop bits and
press The number changes to either 1 or 2, whichever was not dis-
Enter.
played before. To reselect the previous number, press
When you finish changing serial port settings, move the cursor to the
option in the main Setup menu. Then exit the program as described in
Exit
the beginning of this chapter.
2-6
I
again if you want to reselect the previous number.
Enter.
Data length
again.
Enter
Enter.
and press