Setting The Primary Display Type - Epson Equity 320SX PLUS User Manual

Press Enter
number, the computer beeps and does not go on to the next
parameter. Check your drive documentation and try again.
You do not enter a value for Size; SETUP does this
automatically based on the other values you have entered.

Setting the Primary Display Type

This option lets you define the type of adapter you are using
in your computer for your primary display device:
Note that this option defines the display adapter (the built-in
VGA port or an optional video interface card in your
computer), not the monitor connected to it.
If you have connected your monitor to the computer's built-
in VGA port, select
guidelines to select the correct adapter type:
0 If you have a color graphics adapter (CGA) or a multi-
mode graphics adapter (MGA) attached to an RGB (color)
monitor, select
color/mono switch on the MGA card to color.)
MGA, or a Hercules MGA attached to a monochrome
monitor, choose
color/mono switch on the MGA card to mono.)
2-8 Running the setup Program
after typing each number. If you enter an invalid
VGA
or
Co1 or 80x25. (Also be
Monochrome. (Also
EGA.
Otherwise, follow these
remember to set the
sure to set the