Adding Memory Modules - Epson Equity 320SX PLUS User Manual

Adding Memory Modules

Your computer comes with 2MB of memory soldered directly
onto the main system board. By installing SIMMs (single
inline memory modules), you can increase the memory in
your computer up to 24MB. The first 16MB can be used as
either extended or expanded; any memory above 16MB can
be used only as expanded. You can install 256KB, lMB, or
4MB
SIMMs, as described in this section.
Caution
It is best to have your dealer install memory modules for
you because they can be damaged easily if installed
incorrectly. If you prefer, you can install them yourself by
carefully following the instructions in this section.
However, you could transmit an electrostatic discharge
and damage your components; so read this entire section
before you begin.
Before you install SIMMs, check the following guidelines to
ensure that they will work properly:
of 80ns (nanoseconds) or faster. Be sure all the SIMMs
operate at the same speed.
with industry standards; however, you should use Epson
SIMM option kits to ensure reliability and compatibility.
memory you want. See the table on the next page.
Once you have the SIMMs you need, you or your dealer can
install them in your computer. If you are going to install
them yourself, follow the instructions in this section.
Installing and Removing Options
6-14