Starting the Diagnostics Program
To start the diagnostics program, follow these steps:
1. Insert the Reference diskette in drive A and turn on or
reset the computer.
2. When you see the following prompt, press the
Press <Del> to
3. At the next prompt, select
4. At the
System diagnostics. You see a title screen.
5. Press any key to continue. You see the main menu,
described below.
The Main Menu Screen
System board
Basic functionality test
CPU protected mode test
Processor speed test
Coprocessor test
DMA controller test
Interrupt controller test
Timer test
Realtime clock test
CMOS validity test
Testing mode :
Walt on error (Y/N) ? Y Error logging (Y/N) ? N No. of passes : 00001
Prev/Nextwindcu++Prev/NexttestTJ Run highlighted test<Enter> Exit<Esc>
Set parms<F2> Sel/desel test<F3> Se1 all<F4> Desel all<F5> Run sel tests<F6>
Tests basic operation of CPU in real mode
Performing System Diagnostics
B-Z
: prompt, type
A
Memory
Hard disk
Bun time parameters
(T)imebound / (C)ontinuous / (P)assbound ? P
start
SETUP
Start operating system.
I
and press
D
AG
Keyboard
Floppy
key:
Del
to run
Enter
Misc.
Video