Destructive tests
Format
Media analysis
Force bad tracks
Before performing any destructive test, the program displays
the following messages:
All data on hard disk you have
specified may be lost...
Do you still want to continue (Y/N)?
Press Y and
the operation.
Caution
You should not run any of the destructive tests on a SCSI
hard disk drive.
Hard Disk Parameters
The program may ask for the following parameters:
Disk drive identifier
Disk drive type
Interleave factor
Bad track list
Start cylinder number
End cylinder number
Start head number
End head number
Each parameter is described below.
Non-destructive tests
Performance
Seek
Read/verify
Check test cylinder
W A R N I N G
to begin the test. Press
Enter
Performing System Diagnostics
and
to stop
N
Enter
B-13