Setting The Primary Display Type - Epson Equity 386/33 PLUS Setup Manual

2. Use the numeric keys to enter the appropriate values for these
parameters:
Cyln
Head
Size
Press m after typing each number. If you enter an invalid
number, the computer beeps and does not go on to the next
parameter. Check your drive documentation and try again. You
do not enter a value for
based on the other values you have entered.

Setting the Primary Display Type

This option lets you define the type of adapter you are using
for your primary display device:
2-8 Running the SETUP Program
= the number of cylinders on the disk.
= the number of read/write heads in the drive.
= the precompensation cylinder.
parks the heads when you run the HDSIT program).
= the number of sectors on the disk.
= the total amount of storage capacity for the disk
(selectedautomatically).
size;
SETUP does this automatically