Sunhsi Utilities; Hsip_Init Utility - Sun Microsystems Sun PCI High Speed User Manual

4
C H A P T E R

SunHSI Utilities

The SunHSI software includes the hsip_init, hsip_loop, and hsip_stat
utilities. This chapter contains a short description of each utility. Refer to each man
page to get more information on the commands. Also see
on page
This chapter includes the following topics:
"hsip_init Utility" on page 17
■
"hsip_loop Utility" on page 20
■
"hsip_stat Utility" on page 21
■
Note – You need to be superuser (root) in order to run the hsip_init,
hsip_loop, or hsip_stat utilities.

hsip_init Utility

The hsip_init utility enables you to modify some of the hardware operating
modes common to synchronous serial lines. This modification is needed for the
operation of some communications packages and is useful in troubleshooting a link.
See the hsip_init(1M) man page for details.
The hsip_init utility includes options for T1 compatibility and operating modes. See
"T1 Compatibility Options" on page 18
for information on these options.
41.
"Viewing the Man Pages"
and "Operating Modes Options" on page 18
17