Maintenance Mode - Star Trac E-ST Owner's Manual

Updates (saves) the values of all parameters in non-volatile memory, and exits Manager Mode.
To exit Manager Mode without saving any values or settings, press the Q
The items that you may display and change with the previous keys are:
Lowest
Item Value
Serial No 0
Date 01/00
Display Vers 1 01.00
Display Vers 2 01.00
LCB Vers 01.00
Units English
Time 5
Weight 1 (Lb)
1 (KG)
Language N/A

MAINTENANCE MODE

Your Service Representative may need to check accumulated data about the past usage of your STAR TRAC E-ST STEPPER, test its
display controls, or investigate error messages. For these reasons, your Stepper is equipped with a Maintenance Mode. The
Maintenance Mode includes all of the items available through Manager Mode, plus additional items for Service and Diagnostic use. To
enter Maintenance Mode:
1. Press and hold the
2. A beep will sound and "MAINTENANCE MODE" will display momentarily in the Information Window.
3. Release all keys. "SERIAL NO #####" will display in the Information Window.
The following keys are available in MAINTENANCE MODE:
ly. Keys will repeat if held.
ments of 1 unit. These keys do not save the new value - see
- see
Updates (saves) the values of all parameters in non-volatile memory, and exits Maintenance Mode.
To exit Maintenance Mode without saving any values or settings, press the Q
The items that you may display and change with the previous keys are:
STAR TRAC E-ST STEPPER O
Highest Default
Value Value Meaning
65535 0 Serial number (set by factory)
12/99 01/05 Manufacture date for the Stepper (set by factory)
99.99 N/A Display panel software version (set by factory)
99.99 N/A Display panel software version (set by factory)
99.99 N/A Display panel software version (set by factory)
Metric English English = units of pounds, feet,
Metric = units of kilograms, meters
99 99 Maximum time in minutes allowed for program, excluding cool-down.
350 (Lb) 155 lbs Default (to user), typical weight in lb (UNITS=English), or kg
158 (KG) 70 (KG) (UNITS=Metric).
N/A ENGL Language is English (ENGL), Dutch (DUTC), French (FREN), German (GERM),
Portuguese (PORT), Spanish (SPAN), Swedish (SWED), Italian (ITAL) or
Katakana (KATA).
and keys together.
,
Adjust the value of the displayed parameter up and down, respectively, in incre-
Allows you to enter specific values for numeric parameters. These keys do not save the new value
below.
' M
WNER S ANUAL
S key.
UICK TART
Display the next and previous parameters, respective-
below.
S key.
UICK TART
27