Star Micronics MULTI-FONT NX-1000II User Manual page 91

Print quadruple-density 8-bit graphics
Mode
ASCII Decimal Hexadecimal
,-.
< ESC>
"Z" nl n2
Both
27 90 nl n2
IB 5A
nl n2
ml m2 ...
ml m2 ml m2
.-
Prints bit-image graphics at 240 dots per inch horizontally (maximum
1920 dots wide), skipping every second dot in the horizontal direction.
See < ESC> "K" for other information.
Select graphics mode
.-
Mode ASCII Decimal Hexadecimal
< ESC> "*" n(l nj
27 42
nO nl IB 2A nO nl
Both
n2 ml m2 ... n2 ml m2 .. n2 ml m2 ...
Selects one of seven graphics modes depending on the value of no and
prints bit-image graphics in this mode. See < ESC > "K" for information
on nl, n2, ml, m2, ...
no
Graphics mode
O Normal-density
(60 dots per inch)
1 Double-density
(120 dots per inch)
2 Double-density, double-speed
.
3 Quadruple-density
(240 dots per inch)
4 CRT graphics, mode I
(80 dots per inch)
5 Plotter graphics
(72 dots per inch)
..
6 CRT graphics, mode H
(90 dots per inch)
i
1-
Convert graphics density
Mode ASCII Decimal Hexadecimal
Both <ESC> "T' n m 27 63 n m
IB 3F
n
m
Converts graphics defined by subsequent < ESC> "K", < ESC > "L",
L
< ESC > "Y" or < ESC > "Z" commands to a density mode defined
by < ESC> C'*". n is "K", "L", "Y" or "Z", indicating the mode to be
converted.
m
is a code from <0> to <6> indicating one of the modes
..
of < ESC > "*".