Verticalpositioncommands - Star Micronics MULTI-FONT NX-1000II User Manual

Select character height, width, and line spacing
Mode ASCII
I
Decimal
I
Hexadecimal
I
[
<
Esc >
6' "
"@" <4>
27 91 64 4
IB 5B 40 04
Both
<0> <0> <1)> n
Ooon 00 00 00
n
m m m
Selects a combination of character height, width, and line spacing ac-
cording to the value of
n
and m, as below. Does not move the base line.
n
Line spacing I Character height
I
Unchanged
Unchanged
Unchanged
Single
Single
Single
Double
Double
Double
Unchanged
Single height
Double height
Unchanged
Single height
Double height
Unchanged
Single height
Double height
m
Character width
1 Single width (same as < ESC > "W" O)
2 Double width (same as < ESC > "W" 1)
Double-height characters are alwaysprinted at near letter quality. Double
height printing temporarily cancels the super/subscript and condensed
printing modes, but these modes resume when the printer returns to
normal height.
VERTICAL POSITION COMMANDS
Set line spacing to 1/8 inch
—
—
—
—
—
—
—
—
—
—
Mode
ASCII
I
Decimal
I
Hexadecimal
Both ] <ESC> "0"
] 27
48
I
IB 30
—
Sets the distance the paper advances or reverses in subsequent line feeds
to 1/8 inch.
.-.
—
—
—