Lotus 1-2-3, Version 2.X - Epson ActionNote User Manual

Lotus 1-2-3, Version 2.x

The Lotus display driver supports text mode operations for
Lotus 1-2-3, version 2.x, at a resolution of 100 x 60. To install the
driver, follow these steps:
Log onto the Lotus directory on your hard disk that contains
1.
the Lotus INSTALL files.
Insert the Reference diskette into drive A (the external
2.
diskette drive).
Copy the Lotus driver from the Reference diskette to this
3.
directory. At the command prompt, type the following and
press
COPY A:\LOTUS\L100X60.DRV
Type
4.
INSTALL
program.
From the main menu, select Advanced options and
5.
press
6.
Then select Add new drivers to libraryand
press
When the program finishes adding drivers to the library,
7.
select Modify current driver set and press
8.
Select Text display to modify the text mode and
press
Select the following display and text mode:
9.
VGA (100 x 60)
10. Select Return to menu and press
and press to run the Lotus installation
Using the VGA Utilities 6-3