Table of Contents
Advertisement
5. If the drive is making loud or unusual noises, stop the
current operation immediately. If the problem continues,
contact your Authorized Epson Servicer.
Hard Disk Problems
If you have problems with your hard disk drive, check the
following:
1.
Check the hard disk drive light. If you enter commands
(such as COPY) to access the hard disk, the light should be
on when the computer accesses the drive. If the light is
blinking, there may be a problem with the hard disk.
Contact your Authorized Epson Servicer if this occurs.
2.
If you have set a timeout for the hard disk in the SETUP
program and it has timed out, the hard disk drive requires
about 15 seconds to come back up to speed when you
access it again.
3.
Make sure you have formatted the hard disk correctly for the
operating system you are using. See the instructions in your
operating system manual.
4.
Make sure the hard disk drive is inserted correctly. See
Chapter 3 for instructions on removing and inserting the
hard disk drive.
5.
If you still cannot identify the problem, contact your
Authorized Epson Servicer.
Troubleshooting A-11
Advertisement
Table of Contents
