Message Lights; The Back Control Panel - Epson X-PRF 1000 Owner's Manual

Priorit yFax 1000 M anual
STOP
START/COPY

Message lights

The Back Control
Panel
Pressing the STOP
transmission or copying and is pressed after each insertion of a
new paper roll.
After press
dialing, START
Automatic Answering is off, pressing this button starts document
receiving.
Pressing starts copying (as with a photocopy machine) if
COPY
you insert a document and do not dial a number.
SENDING DOCUMENT.
document is being sent.
RECEIVING DOCUMENT.
is accepting an incoming fax document, which prints out on the
paper appearing through the slot at the front of the machine.
ERROR. When this light is on, a malfunction may have occurred.
See Troubleshooting, Chapter 4. If this light is on immediately
after plugging in the machine or after inserting a roll of paper,
press
STOP.
ADD PAPER. When this light is on, your fax machine has
approximately four inches of paper or less left on the paper roll.
The back control panel contains three switches.
button halts operation during document
to begin sending a document. If
When this light is on, it shows that a
When this light is on, your fax machine