Epson X-PRF 1000 Owner's Manual page 22

Epson priority fax owner's manual
Table of Contents

Advertisement

Note
Place the paper into the machine. Then pull approximately five
inches (15 cm) of paper from the top of the roll and insert the end
of the paper under the paper cutter guide, as shown in the
illustration below. (Paper loading instructions are also printed
inside the fax machine.)
If you' ve inserted the paper correctly, it comes out through the
front of the machine. Make sure
(10 cm) of paper protrude from the unit.
Push. the recording paper cover shut until you hear a click. The
automatic cutter then cuts off the excess paper.
Note
STOP
Press
Be sure not to insert the paper roll upside down. If the
paper roll is inserted upside down, the fax machine cannot
produce an image.
Any time you open the recording paper cover, make sure
that the paper remains under the paper cutter guide when
you close the cover.
The fax machine is ready for use.
STOP.
Set t in g Up t h e Priorit yFax
that
approximately four inches
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Priorityfax 1000

Table of Contents