Safety instructions
EMC class
►
This video recorder (DVR) is a class A device in accordance with EN 55022.
►
This device may cause interference to other equipment in domestic use. In such cases the persons opera-
ting the DVR are required to provide appropriate countermeasures, for which they themselves bear the cost.
Importance of these Operating Instructions
►
Please read the safety instructions and the other information contained in the Operating Instructions before
connecting up and operating the DVR.
►
The Operating Instructions should be kept in a safe place for later reference.
Ambient conditions for the DVR
►
The DVR should be protected against excessive heat, dust, damp and vibration.
►
The DVR may only be operated at temperatures between +5°C and +40°C, and up to a maximum air
humidity of 90%.
►
The DVR may only be operated indoors, and must be protected against incursion of water and damp.
Care of the DVR
►
Never switch on the DVR when damp has penetrated it. In such cases, have the DVR checked by a qualified
service engineer.
►
Do not place any heavy objects on the DVR.
►
Never cover over the DVR's vents.
►
Never insert metal objects or any other items into the vents. This may permanently damage the DVR.
►
The housing may only be opened by authorised persons. Repairs may only be carried out by qualified
service personnel.
►
The DVR must be disconnected from the power supply before its housing is opened.
Getting started with the DVR
►
When laying the connecting cables, make sure no weight is placed on them, that they are not kinked or
damaged, and that no damp can penetrate them.
Cleaning the DVR
►
The housing of the DVR may only be cleaned with a damp (not wet) cloth,
►
Use only a mild detergent. Do not use solvent-containing detergents or petrol. This could permanently
damage the surface finish.
Spare parts
►
Use only original spare parts from Videor Technical GmbH.
DTR-60XX