Resetting Camera Defaults; Version Confirmation - Epson PhotoPC L-400 Owner's Manual

RESETTING CAMERA DEFAULTS

How to reset the camera to the original factory default settings.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
1. Use the ud buttons to choose RESET DEFAULT. Press the
button.
2. To reset the camera to its original default settings, press the
MACRO button.
To cancel the default resetting, press the

VERSION CONFIRMATION

How to confirm firmware version of this camera and display compatible
printers.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
1. Use the ud buttons to choose "VERSION". Press the FLASH button.
The firmware version number and compatible printers will appear on
the LCD monitor. To find a suitable printer, confirm the types displayed
on the EPSON Internet Home page.
2. Press the MACRO button to return to step
FLASH
FLUSH button.
1
.
ADDITIONAL SETTINGS
51