Changing The Frames; Print Settings; How To Change Print Settings - Epson PhotoPC L-400 Owner's Manual

2. Use the ud buttons to select the print option, then press the
button.
If you choose "Select Images" only those you mark will be printed,
together with their frames. Images not taken in P.I.F. will be printed
normally. You can also print multiple copies of each. (See page 40.)
3. Press the PRINT button to begin the printing process.
Press the MENU button or the
settings. (See pages 42-45.)
Press the MACRO button to return to step
ALERT
If any DPOF files (See page 46.) exist, a message will appear asking whether you would
like the settings to be used. If you choose not to use the settings, all images will be set at "0".

CHANGING THE FRAMES

Frames may be changed when printing directly from the camera.
Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.
1. When viewing 1 image, use the l r buttons, when viewing 6 use the
udl r buttons to choose the images you wish to print.
For PRINTING mode see page 42.
2. Press the PRINT button to go to the printing screen. Use the ud
buttons to select the desired option, then press the
3. If you choose "Select Images", press the
frame choices on the monitor.
Press the MACRO button to return to step
You can preview a P.I.F. picture with its frame by selecting "P.I.F.
Preview". (See page 28.)
Note:
An alternate way to change frames is to press the MENU or the
button to display "Print Settings". You can then choose "Select P.I.F." on
"P.I.F. Preview" with the ud button.
4. Use the ud buttons and display the frame that you would like to
use.To remove a frame select the "---".
Press the MACRO button to return to step
5. Press the FLASH button to link the displayed frame to your picture.
42
DIRECT PRINTING
PRINT
FLASH button to change the print
2
.
PRINT button.
FLASH button to display
2
.
FLUSH
2
.

PRINT SETTINGS

How to select different print settings for better images.

HOW TO CHANGE PRINT SETTINGS

Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.
PRINT button MENU button
MACRO button
1. Press the PRINT button to change the display to DIRECT
PRINTING mode.
Press the MACRO button to return to PLAYBACK mode.
2. Use the ud buttons to select the print option, then press the
button.
3. Press the MENU button or the
SETUP.
Press the MENU button or the
Press the l r buttons to go to the "Select Images", "P.I.F." or "Utility"
screen.
The next steps are all continued from step
l button
u button
r button
d button
FLASH button
FLASH button to go to PRINT
MACRO button to return to step
4
.
PRINT
2
.