Turn On The Camera; Set Time And Date - Epson R-D1s User Manual

Turn on the Camera

To turn on the camera, move the power switch to the On position. The
status gauge displays the current settings: white balance, remaining
battery power, image quality, and the number of shots remaining (on
the perimeter).
Caution:
c
Never turn off the camera while the memory card access light is on. This
may cause data in the card to be lost or damaged, or render the memory
card unusable.
4
Remaining shots
Image quality
Battery power
White balance

Set Time and Date

Follow these steps to set the time and date:
1. Pull open the LCD monitor, flip it over, and close it.
2. Press the (LCD) button.
3. Rotate the jog dial to change the date as necessary, then press the
(MENU) button to display the next item.