Power Save Settings; Video Out Setting - Epson PhotoPC P-1000 User Manual

Power save settings

This menu provides the settings for the power save
mode.
Power Save Settings
Auto backlight control duration:
1 min
Auto power off duration:
1 min
The LCD screen goes dark when Photo Viewer is idle for this
period of time. Press OK to apply the setting and return to the
previous screen.
Auto backlight control duration
Set the time after which the LCD's backlight turns off
if there are no operations. You can set the time by
moving the slidebar from 1 minute to 5 minutes. The
default setting is 3 minutes.
Auto power off duration
Set the time until the power is shut down
automatically if there are no operations to save the
battery. You can set the time by moving the slidebar
from 1 minute to 10 minutes. The default setting is 5
minutes.
52
Customizing Settings
5 min
10 min

Video out setting

You can select the video output signal method.
Video Out Setting
Video out:
NTSC
Press OK to select and return to the previous screen. Press
cancel to disregard the selection.
Video out
Select the signal method from either NTSC or PAL.
Note:
After changing the setting, reconnect the VIDEO cable.
PAL