Panasonic PT-RW330U Operating Instructions Manual page 78

Setting the audio output during standby
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [IN STANDBY MODE].
4)
Press qw to switch [IN STANDBY MODE].
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When [STANDBY MODE] ( x page 71) of [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby.
f The projector has no built-in speakers.
Audio can be output via external audio systems connected to the audio output terminal.
Setting audio input when HDMI input is selected
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [HDMI].
4)
Press qw to switch [HDMI].
f The items will switch each time you press the button.
[HDMI AUDIO]
[AUDIO IN]
Note
f If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.
Setting audio input when DIGITAL LINK input is selected
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [DIGITAL LINK].
4)
Press qw to switch [DIGITAL LINK].
f The items will switch each time you press the button.
[DIGITAL LINK AUDIO]
[AUDIO IN]
Note
f If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.
78 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Turns off audio output during standby.
Turns on audio output during standby.
Outputs HDMI audio.
Outputs audio connected via the <AUDIO IN> terminal.
Outputs DIGITAL LINK audio.
Outputs audio connected via the <AUDIO IN> terminal.