Panasonic PT-RW330U Operating Instructions Manual page 64

4)
Press qw to switch [OSD POSITION].
f The items will switch each time you press the button.
[5]
[6]
[7]
[8]
[9]
[1]
[2]
[3]
[4]
Setting [OSD DESIGN]
Set the color of the menu screen (OSD).
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD DESIGN].
4)
Press qw to switch [OSD DESIGN].
f The items will switch each time you press the button.
[1]
[2]
[3]
[4]
[5]
[6]
Setting [OSD MEMORY]
Set hold for the position of the menu screen (OSD) cursor.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD MEMORY].
4)
Press qw to switch [OSD MEMORY].
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the power is turned off and the projector is in standby mode.
64 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets to the center of the screen.
Sets to the bottom center of the screen.
Sets to the upper right of the screen.
Sets to the right center of the screen.
Sets to the right bottom of the screen.
Sets to the upper left of the screen.
Sets to the center left of the screen.
Sets to the bottom left of the screen.
Sets to the top center of the screen.
Sets to yellow.
Sets to blue.
Sets to white.
Sets to green.
Sets to peach.
Sets to brown.
Holds the cursor position.
Does not hold the cursor position.