Panasonic PT-RW330U Operating Instructions Manual page 105

[CRESTRON RoomView] page
The projector can be monitored and/or controlled with RoomView.
To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the
[CRESTRON RoomView] button is not displayed on the web control screen.)
The control page of RoomView is displayed by clicking [CRESTRON RoomView].
It is not displayed if Adobe Flash Player is not installed on the computer used, or the browser used does not support Flash. In that case, click
[Back] on the control page to go back to the previous page.
Control page
1 [Tools][Info][Help]
Tabs for selecting the setting, information, or help page of the
projector.
2 [POWER]
Switches the power on/off.
3 [VOL DOWN]/[AV MUTE]/[VOL UP]
Operate the volume/AV mute.
These operations are not available when the power of the
projector is turned off.
[Tools] page
Click [Tools] on the control page.
1 [Control System]
Set the information required for communicating with the
controller to be connected with the projector.
2 [User Password]
Set the user rights password for the RoomView control page.
3 [Admin Password]
Set the administrator rights password for the RoomView control
page.
4 Network Status
Displays the settings of wired LAN.
[DHCP]
Displays the current setting.
[IpAddress]
Displays the current setting.
[SubnetMask]
Displays the current setting.
Chapter 4 Settings — [NETWORK] menu
1
2
3
4
5
6
7
4 [Input Select]
Controls input selection.
Not available when the power of the projector is turned off.
5 Menu screen control buttons
Navigates the menu screen.
6 Freeze/image quality adjustment
Controls items related to freeze/image quality.
7 [Back]
Performs return to the previous page.
1
2
3
4
5
[DefaultGateway]
Displays the current setting.
[DNSServer]
Displays the current setting.
5 [Exit]
Returns to the control page.
ENGLISH - 105