Panasonic PT-RW330U Operating Instructions Manual page 73

3)
Select and assign program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. "- - -" indicates that the program number has not been set yet.
How to set a program
You can set up to 16 commands to each program.
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3)
Press as to select [PROGRAM EDIT].
4)
Press qw to select a program number and then press the <ENTER> button.
5)
Press as to select a command number and press the <ENTER> button.
f You can change the page using qw .
6)
Press as to select [TIME], and press the <ENTER> button.
7)
Press qw to select the hour and minute, press as to set the time, and press the <ENTER> button.
8)
Press as to select [COMMAND].
9)
Press qw to switch [COMMAND].
f The items will switch each time you press the button.
f For [COMMAND] where detailed settings are available, the settings configured in Step 11) are displayed.
[COMMAND]
[POWER ON]
[STANDBY]
[AV MUTE]
[INPUT]
[DIGITAL LINK INPUT]
[LIGHT POWER]
[IN STANDBY MODE(AUDIO)]
[VOLUME]
*1 When the Panasonic twisted-pair-cable transmitter (such as optional digital interface box (Model No.: ET-YFB100G)) is connected to the
projector, its input name is reflected to [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is
disabled.
10)
Press the <ENTER> button.
f The [COMMAND] detailed screen is displayed.
11)
Press as to select a [COMMAND] setting.
f For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw .
Chapter 4 Settings — [PROJECTOR SETUP] menu
[COMMAND] setting
―
―
[OFF]
[ON]
[COMPUTER]
[VIDEO]
[DVI-I]
[HDMI]
[DIGITAL LINK]
[CURRENT]
[INPUT1] - [INPUT10]
*1
[NORMAL]
[ECO SAVE1]
[ECO SAVE2]
[LOW]
[OFF]
[ON]
[0] - [63]
Description
Switch on the projector.
Enters standby.
Cancels the AV mute.
Turns off the video and audio.
Switches to COMPUTER input.
Switches to VIDEO input.
Switches to DVI-I input.
Switches to HDMI input.
Sets the input to DIGITAL LINK.
Switches to DIGITAL LINK input with the currently selected
connection.
Can only be selected when [INPUT] is set to [DIGITAL LINK].
Switches to DIGITAL LINK input, and that input switches to
specified input when the Panasonic twisted-pair-cable transmitter is
connected.
Can only be selected when [INPUT] is set to [DIGITAL LINK].
Prioritizes luminance.
Reduces average power by approximately 20 % compared to
[NORMAL] without affecting the brightness.
Reduces average power by approximately 30 % compared to
[NORMAL] without affecting the brightness.
Saves more power and reduces luminance.
Turns off audio output during standby.
Turns on audio output during standby.
Sets the volume.
ENGLISH - 73