Epson PhotoPC 700 User Manual page 83

Taking a picture takes too long.
You may be pressing the shutter button all the way
down at once. Hold the shutter button halfway down
to lock the auto focus, then press the shutter button
the rest of the way down to take the photo. For more
information, see page 2-4.
Note:
When you try to take a picture by clicking the shutter
once, the camera tries to process focus, exposure etc., all at
the same time. This is why it seems it is taking too long to
take a picture.
The flash does not work.
Make sure the flash is set to Automatic or Forced
Flash. See page 2-9 for more information on setting
the flash.
Check the batteries and make sure they are installed
correctly. Replace the batteries if necessary, following
the instructions on page 1-4.
Nothing appears on the LCD screen in View mode.
Make sure the power is on. Power comes on
automatically when the lens cover is opened fully.
Check the batteries and make sure they are installed
correctly. Replace the batteries if necessary, following
the instructions on page 1-4.
The camera may have shut off automatically. To turn
the power back on, press the shutter button, or close
and open the lens cover.
Nothing appears on the LCD screen in Playback mode.
Check the batteries and make sure they are installed
correctly. Replace the batteries if necessary, following
the instructions on page 1-4.
The camera may have shut off automatically. To turn
the power back on, press the shutter button, or close
and reopen the lens cover.
The image on the LCD monitor screen is too dark, or
is not visible at all.
Adjust the brightness of the LCD screen if necessary,
following the instructions on page 3-8.
You cannot select the mode you want on the LCD
monitor.
Some modes cannot be selected because of other
selections; for example, panorama and continuous
shooting modes cannot be set at the same time.
Check this User's Guide for possible selections.
Maintenance and Troubleshooting
6
6-3