Epson PhotoPC 700 User Manual page 62

To print, access the Direct Print program as described on
page 4-4, then follow the instructions below for the print
mode you want to use.
Full-Size print mode
Follow these steps to print using the Full Size print mode:
1. Access the Direct Print program as described on page
4-4. Press the
press the SELECT button. With Full size selected,
press the SELECT button again.
2. Select Photo and press the SELECT button. Choose All
if you want to print all the images, then press the
SELECT button once more.
If you want to print an individual image, choose Select.
Thumbnail images of the first nine photos in your
camera appear with the currently selected image
framed in blue. Press the
the image you want to print, then press SELECT. You
can select several images at the same time.
3. To change the paper size and type, number of copies
(1-99), color, printing mode, and whether to print the
time and date the photo was taken, press the
button to select the option you want to change,
then press the SELECT button. The settings for that
option appear on the screen.
4-8
Using the Direct Print Program
button to highlight Layout, then
or button to frame
Note:
If you select to print on Photo paper, you cannot select
Time ON.
4. Press the
press the SELECT button.
5. Connect the camera to the printer as described on page
4-2, then turn on the printer and load the size and
type of paper you selected. For paper loading
instructions, see your printer User's Guide.
6. When you are ready to start printing, press the
button to select Print.
7. Press the SELECT button. The camera starts sending
the image data to the printer.
While the camera is sending data and printing, the
LCD screen goes blank and star icons move across
the display panel on the top of the camera.
Note:
To cancel printing, hold down the camera's BACK button
for about three seconds. A message stating printing is
canceled appears on the LCD screen for three seconds,
or
before returning to the Direct Print menu. The printer
stops printing and ejects the paper.
or button to select a setting, then